Lint
Lint/AmbiguousBlockAssociation
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.48 |
1.13 |
This cop checks for ambiguous block association with method when param passed without parentheses.
This cop can customize ignored methods with IgnoredMethods
.
Examples
# bad
some_method a { |val| puts val }
# good
# With parentheses, there's no ambiguity.
some_method(a { |val| puts val })
# or (different meaning)
some_method(a) { |val| puts val }
# good
# Operator methods require no disambiguation
foo == bar { |b| b.baz }
# good
# Lambda arguments require no disambiguation
foo = ->(bar) { bar.baz }
Lint/AmbiguousOperator
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.17 |
0.83 |
This cop checks for ambiguous operators in the first argument of a method invocation without parentheses.
Lint/AmbiguousRegexpLiteral
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.17 |
0.83 |
This cop checks for ambiguous regexp literals in the first argument of a method invocation without parentheses.
Lint/AssignmentInCondition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
- |
This cop checks for assignments in the conditions of if/while/until.
AllowSafeAssignment
option for safe assignment.
By safe assignment we mean putting parentheses around
an assignment to indicate "I know I’m using an assignment
as a condition. It’s not a mistake."
Lint/BigDecimalNew
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.53 |
- |
BigDecimal.new()
is deprecated since BigDecimal 1.3.3.
This cop identifies places where BigDecimal.new()
can be replaced by BigDecimal()
.
Lint/BinaryOperatorWithIdenticalOperands
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
No |
0.89 |
1.7 |
This cop checks for places where binary operator has identical operands.
It covers arithmetic operators: +
, -
, ,
/
, %
, *
;
comparison operators: ==
, ===
, =~
, >
, >=
, <
, ⇐
;
bitwise operators: |
, ^
, &
, <<
, >>
;
boolean operators: &&
, ||
and "spaceship" operator - <⇒
.
This cop is marked as unsafe as it does not consider side effects when calling methods and thus can generate false positives: if wr.take_char == '\0' && wr.take_char == '\0'
Lint/CircularArgumentReference
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.33 |
- |
This cop checks for circular argument references in optional keyword arguments and optional ordinal arguments.
This cop mirrors a warning produced by MRI since 2.2.
Examples
# bad
def bake(pie: pie)
pie.heat_up
end
# good
def bake(pie:)
pie.refrigerate
end
# good
def bake(pie: self.pie)
pie.feed_to(user)
end
# bad
def cook(dry_ingredients = dry_ingredients)
dry_ingredients.reduce(&:+)
end
# good
def cook(dry_ingredients = self.dry_ingredients)
dry_ingredients.combine
end
Lint/ConstantDefinitionInBlock
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.91 |
1.3 |
Do not define constants within a block, since the block’s scope does not isolate or namespace the constant in any way.
If you are trying to define that constant once, define it outside of the block instead, or use a variable or method if defining the constant in the outer scope would be problematic.
For meta-programming, use const_set
.
Examples
# bad
task :lint do
FILES_TO_LINT = Dir['lib/*.rb']
end
# bad
describe 'making a request' do
class TestRequest; end
end
# bad
module M
extend ActiveSupport::Concern
included do
LIST = []
end
end
# good
task :lint do
files_to_lint = Dir['lib/*.rb']
end
# good
describe 'making a request' do
let(:test_request) { Class.new }
# see also `stub_const` for RSpec
end
# good
module M
extend ActiveSupport::Concern
included do
const_set(:LIST, [])
end
end
Lint/ConstantResolution
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Disabled |
Yes |
No |
0.86 |
- |
Check that certain constants are fully qualified.
This is not enabled by default because it would mark a lot of offenses unnecessarily.
Generally, gems should fully qualify all constants to avoid conflicts with
the code that uses the gem. Enable this cop without using Only
/Ignore
Large projects will over time end up with one or two constant names that
are problematic because of a conflict with a library or just internally
using the same name a namespace and a class. To avoid too many unnecessary
offenses, Enable this cop with Only: [The, Constant, Names, Causing, Issues]
Lint/Debugger
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.14 |
1.10 |
This cop checks for debug calls (such as debugger
or binding.pry
) that should
not be kept for production code.
The cop can be configured using DebuggerMethods
. By default, a number of gems
debug entrypoints are configured (Kernel
, Byebug
, Capybara
, Pry
, Rails
,
and WebConsole
). Additional methods can be added.
Specific default groups can be disabled if necessary:
Lint/Debugger:
WebConsole: ~
Examples
# bad (ok during development)
# using pry
def some_method
binding.pry
do_something
end
# bad (ok during development)
# using byebug
def some_method
byebug
do_something
end
# good
def some_method
do_something
end
Configurable attributes
Name | Default value | Configurable values |
---|---|---|
DebuggerReceivers |
|
Array |
DebuggerMethods |
|
Lint/DeprecatedClassMethods
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.19 |
- |
This cop checks for uses of the deprecated class method usages.
Lint/DeprecatedConstants
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
Yes |
1.8 |
- |
This cop checks for deprecated constants.
It has DeprecatedConstants
config. If there is an alternative method, you can set
alternative value as Alternative
. And you can set the deprecated version as
DeprecatedVersion
. These options can be omitted if they are not needed.
DeprecatedConstants: 'DEPRECATED_CONSTANT': Alternative: 'alternative_value' DeprecatedVersion: 'deprecated_version'
By default, NIL
, TRUE
, FALSE
and Random::DEFAULT
are configured.
Examples
# bad
NIL
TRUE
FALSE
Random::DEFAULT # Return value of Ruby 2 is `Random` instance, Ruby 3.0 is `Random` class.
# good
nil
true
false
Random.new # `::DEFAULT` has been deprecated in Ruby 3, `.new` is compatible with Ruby 2.
Configurable attributes
Name | Default value | Configurable values |
---|---|---|
DeprecatedConstants |
|
Lint/DeprecatedOpenSSLConstant
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.84 |
- |
Algorithmic constants for OpenSSL::Cipher
and OpenSSL::Digest
deprecated since OpenSSL version 2.2.0. Prefer passing a string
instead.
Examples
# Example for OpenSSL::Cipher instantiation.
# bad
OpenSSL::Cipher::AES.new(128, :GCM)
# good
OpenSSL::Cipher.new('aes-128-gcm')
# Example for OpenSSL::Digest instantiation.
# bad
OpenSSL::Digest::SHA256.new
# good
OpenSSL::Digest.new('SHA256')
# Example for ::Digest inherited class methods.
# bad
OpenSSL::Digest::SHA256.digest('foo')
# good
OpenSSL::Digest.digest('SHA256', 'foo')
Lint/DisjunctiveAssignmentInConstructor
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.62 |
0.88 |
This cop checks constructors for disjunctive assignments that should be plain assignments.
So far, this cop is only concerned with disjunctive assignment of instance variables.
In ruby, an instance variable is nil until a value is assigned, so the disjunction is unnecessary. A plain assignment has the same effect.
Lint/DuplicateBranch
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.3 |
1.7 |
This cop checks that there are no repeated bodies
within if/unless
, case-when
and rescue
constructs.
With IgnoreLiteralBranches: true
, branches are not registered
as offenses if they return a basic literal value (string, symbol,
integer, float, rational, complex, true
, false
, or nil
), or
return an array, hash, regexp or range that only contains one of
the above basic literal values.
With IgnoreConstantBranches: true
, branches are not registered
as offenses if they return a constant value.
Examples
# bad
if foo
do_foo
do_something_else
elsif bar
do_foo
do_something_else
end
# good
if foo || bar
do_foo
do_something_else
end
# bad
case x
when foo
do_foo
when bar
do_foo
else
do_something_else
end
# good
case x
when foo, bar
do_foo
else
do_something_else
end
# bad
begin
do_something
rescue FooError
handle_error
rescue BarError
handle_error
end
# good
begin
do_something
rescue FooError, BarError
handle_error
end
Lint/DuplicateCaseCondition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.45 |
- |
This cop checks that there are no repeated conditions used in case 'when' expressions.
Lint/DuplicateElsifCondition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.88 |
- |
This cop checks that there are no repeated conditions used in if 'elsif'.
Lint/DuplicateHashKey
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.34 |
0.77 |
This cop checks for duplicated keys in hash literals.
This cop mirrors a warning in Ruby 2.2.
Lint/DuplicateMethods
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.29 |
- |
This cop checks for duplicated instance (or singleton) method definitions.
Lint/DuplicateRescueException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
- |
This cop checks that there are no repeated exceptions used in 'rescue' expressions.
Lint/EachWithObjectArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.31 |
- |
This cop checks if each_with_object is called with an immutable argument. Since the argument is the object that the given block shall make calls on to build something based on the enumerable that each_with_object iterates over, an immutable argument makes no sense. It’s definitely a bug.
Lint/ElseLayout
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.17 |
1.2 |
This cop checks for odd else
block layout - like
having an expression on the same line as the else
keyword,
which is usually a mistake.
Its auto-correction tweaks layout to keep the syntax. So, this auto-correction
is compatible correction for bad case syntax, but if your code makes a mistake
with elsif
and else
, you will have to correct it manually.
Examples
# bad
if something
# ...
else do_this
do_that
end
# good
# This code is compatible with the bad case. It will be auto-corrected like this.
if something
# ...
else
do_this
do_that
end
# This code is incompatible with the bad case.
# If `do_this` is a condition, `elsif` should be used instead of `else`.
if something
# ...
elsif do_this
do_that
end
Lint/EmptyBlock
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.1 |
1.15 |
This cop checks for blocks without a body. Such empty blocks are typically an oversight or we should provide a comment be clearer what we’re aiming for.
Empty lambdas and procs are ignored by default.
For backwards compatibility, the configuration that allows/disallows
empty lambdas and procs is called AllowEmptyLambdas , even though it also
applies to procs.
|
Examples
# bad
items.each { |item| }
# good
items.each { |item| puts item }
AllowComments: true (default)
# good
items.each do |item|
# TODO: implement later (inner comment)
end
items.each { |item| } # TODO: implement later (inline comment)
AllowComments: false
# bad
items.each do |item|
# TODO: implement later (inner comment)
end
items.each { |item| } # TODO: implement later (inline comment)
Lint/EmptyClass
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.3 |
- |
This cop checks for classes and metaclasses without a body. Such empty classes and metaclasses are typically an oversight or we should provide a comment to be clearer what we’re aiming for.
Examples
# bad
class Foo
end
class Bar
class << self
end
end
class << obj
end
# good
class Foo
def do_something
# ... code
end
end
class Bar
class << self
attr_reader :bar
end
end
class << obj
attr_reader :bar
end
Lint/EmptyConditionalBody
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
- |
This cop checks for the presence of if
, elsif
and unless
branches without a body.
Lint/EmptyEnsure
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.10 |
0.48 |
This cop checks for empty ensure
blocks
Lint/EmptyFile
Lint/EmptyInPattern
Required Ruby version: 2.7 |
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.16 |
- |
This cop checks for the presence of in
pattern branches without a body.
Lint/EmptyWhen
Lint/EnsureReturn
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.9 |
0.83 |
This cop checks for return
from an ensure
block.
return
from an ensure block is a dangerous code smell as it
will take precedence over any exception being raised,
and the exception will be silently thrown away as if it were rescued.
If you want to rescue some (or all) exceptions, best to do it explicitly
Examples
# bad
def foo
do_something
ensure
cleanup
return self
end
# good
def foo
do_something
self
ensure
cleanup
end
# also good
def foo
begin
do_something
rescue SomeException
# Let's ignore this exception
end
self
ensure
cleanup
end
Lint/ErbNewArguments
Required Ruby version: 2.6 |
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.56 |
- |
This cop emulates the following Ruby warnings in Ruby 2.6.
% cat example.rb ERB.new('hi', nil, '-', '@output_buffer') % ruby -rerb example.rb example.rb:1: warning: Passing safe_level with the 2nd argument of ERB.new is deprecated. Do not use it, and specify other arguments as keyword arguments. example.rb:1: warning: Passing trim_mode with the 3rd argument of ERB.new is deprecated. Use keyword argument like ERB.new(str, trim_mode:…) instead. example.rb:1: warning: Passing eoutvar with the 4th argument of ERB.new is deprecated. Use keyword argument like ERB.new(str, eoutvar: …) instead.
Now non-keyword arguments other than first one are softly deprecated
and will be removed when Ruby 2.5 becomes EOL.
ERB.new
with non-keyword arguments is deprecated since ERB 2.2.0.
Use :trim_mode
and :eoutvar
keyword arguments to ERB.new
.
This cop identifies places where ERB.new(str, trim_mode, eoutvar)
can
be replaced by ERB.new(str, :trim_mode: trim_mode, eoutvar: eoutvar)
.
Examples
# Target codes supports Ruby 2.6 and higher only
# bad
ERB.new(str, nil, '-', '@output_buffer')
# good
ERB.new(str, trim_mode: '-', eoutvar: '@output_buffer')
# Target codes supports Ruby 2.5 and lower only
# good
ERB.new(str, nil, '-', '@output_buffer')
# Target codes supports Ruby 2.6, 2.5 and lower
# bad
ERB.new(str, nil, '-', '@output_buffer')
# good
# Ruby standard library style
# https://github.com/ruby/ruby/commit/3406c5d
if ERB.instance_method(:initialize).parameters.assoc(:key) # Ruby 2.6+
ERB.new(str, trim_mode: '-', eoutvar: '@output_buffer')
else
ERB.new(str, nil, '-', '@output_buffer')
end
# good
# Use `RUBY_VERSION` style
if RUBY_VERSION >= '2.6'
ERB.new(str, trim_mode: '-', eoutvar: '@output_buffer')
else
ERB.new(str, nil, '-', '@output_buffer')
end
Lint/FlipFlop
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.16 |
- |
This cop looks for uses of flip-flop operator based on the Ruby Style Guide.
Here is the history of flip-flops in Ruby. flip-flop operator is deprecated in Ruby 2.6.0 and the deprecation has been reverted by Ruby 2.7.0 and backported to Ruby 2.6. See: https://bugs.ruby-lang.org/issues/5400
Examples
# bad
(1..20).each do |x|
puts x if (x == 5) .. (x == 10)
end
# good
(1..20).each do |x|
puts x if (x >= 5) && (x <= 10)
end
Lint/FloatComparison
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
- |
This cop checks for the presence of precise comparison of floating point numbers.
Floating point values are inherently inaccurate, and comparing them for exact equality
is almost never the desired semantics. Comparison via the ==/!=
operators checks
floating-point value representation to be exactly the same, which is very unlikely
if you perform any arithmetic operations involving precision loss.
Examples
# bad
x == 0.1
x != 0.1
# good - using BigDecimal
x.to_d == 0.1.to_d
# good
(x - 0.1).abs < Float::EPSILON
# good
tolerance = 0.0001
(x - 0.1).abs < tolerance
# Or some other epsilon based type of comparison:
# https://www.embeddeduse.com/2019/08/26/qt-compare-two-floats/
Lint/FloatOutOfRange
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.36 |
- |
This cop identifies Float literals which are, like, really really really really really really really really big. Too big. No-one needs Floats that big. If you need a float that big, something is wrong with you.
Lint/FormatParameterMismatch
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.33 |
- |
This lint sees if there is a mismatch between the number of expected fields for format/sprintf/#% and what is actually passed as arguments.
In addition it checks whether different formats are used in the same format string. Do not mix numbered, unnumbered, and named formats in the same format string.
Lint/HashCompareByIdentity
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
No |
0.93 |
- |
Prefer using Hash#compare_by_identity
than using object_id
for hash keys.
This cop is marked as unsafe as a hash possibly can contain other keys besides `object_id`s.
Examples
# bad
hash = {}
hash[foo.object_id] = :bar
hash.key?(baz.object_id)
# good
hash = {}.compare_by_identity
hash[foo] = :bar
hash.key?(baz)
Lint/HeredocMethodCallPosition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Disabled |
Yes |
Yes |
0.68 |
- |
This cop checks for the ordering of a method call where the receiver of the call is a HEREDOC.
Examples
# bad
<<-SQL
bar
SQL
.strip_indent
<<-SQL
bar
SQL
.strip_indent
.trim
# good
<<~SQL
bar
SQL
<<~SQL.trim
bar
SQL
Lint/IdentityComparison
Lint/ImplicitStringConcatenation
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.36 |
- |
This cop checks for implicit string concatenation of string literals which are on the same line.
Lint/IneffectiveAccessModifier
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.36 |
- |
This cop checks for private
or protected
access modifiers which are
applied to a singleton method. These access modifiers do not make
singleton methods private/protected. private_class_method
can be
used for that.
Lint/InheritException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.41 |
- |
This cop looks for error classes inheriting from Exception
and its standard library subclasses, excluding subclasses of
StandardError
. It is configurable to suggest using either
RuntimeError
(default) or StandardError
instead.
Lint/LambdaWithoutLiteralBlock
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
Yes |
1.8 |
- |
This cop checks uses of lambda without a literal block. It emulates the following warning in Ruby 3.0:
% ruby -vwe 'lambda(&proc {})' ruby 3.0.0p0 (2020-12-25 revision 95aff21468) [x86_64-darwin19] -e:1: warning: lambda without a literal block is deprecated; use the proc without lambda instead
This way, proc object is never converted to lambda. Auto-correction replaces with compatible proc argument.
Lint/LiteralAsCondition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.51 |
- |
This cop checks for literals used as the conditions or as operands in and/or expressions serving as the conditions of if/while/until.
Lint/Loop
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.9 |
1.3 |
This cop checks for uses of begin…end while/until something
.
The cop is marked as unsafe because behaviour can change in some cases, including
if a local variable inside the loop body is accessed outside of it, or if the
loop body raises a StopIteration
exception (which Kernel#loop
rescues).
Examples
# bad
# using while
begin
do_something
end while some_condition
# bad
# using until
begin
do_something
end until some_condition
# good
# while replacement
loop do
do_something
break unless some_condition
end
# good
# until replacement
loop do
do_something
break if some_condition
end
Lint/MissingCopEnableDirective
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.52 |
- |
This cop checks that there is an # rubocop:enable …
statement
after a # rubocop:disable …
statement. This will prevent leaving
cop disables on wide ranges of code, that latter contributors to
a file wouldn’t be aware of.
Examples
# Lint/MissingCopEnableDirective:
# MaximumRangeSize: .inf
# good
# rubocop:disable Layout/SpaceAroundOperators
x= 0
# rubocop:enable Layout/SpaceAroundOperators
# y = 1
# EOF
# bad
# rubocop:disable Layout/SpaceAroundOperators
x= 0
# EOF
# Lint/MissingCopEnableDirective:
# MaximumRangeSize: 2
# good
# rubocop:disable Layout/SpaceAroundOperators
x= 0
# With the previous, there are 2 lines on which cop is disabled.
# rubocop:enable Layout/SpaceAroundOperators
# bad
# rubocop:disable Layout/SpaceAroundOperators
x= 0
x += 1
# Including this, that's 3 lines on which the cop is disabled.
# rubocop:enable Layout/SpaceAroundOperators
Lint/MissingSuper
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
1.4 |
This cop checks for the presence of constructors and lifecycle callbacks
without calls to super
.
This cop does not consider method_missing
(and respond_to_missing?
)
because in some cases it makes sense to overtake what is considered a
missing method. In other cases, the theoretical ideal handling could be
challenging or verbose for no actual gain.
Examples
# bad
class Employee < Person
def initialize(name, salary)
@salary = salary
end
end
# good
class Employee < Person
def initialize(name, salary)
super(name)
@salary = salary
end
end
# bad
class Parent
def self.inherited(base)
do_something
end
end
# good
class Parent
def self.inherited(base)
super
do_something
end
end
Lint/MixedRegexpCaptureTypes
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.85 |
- |
Do not mix named captures and numbered captures in a Regexp literal because numbered capture is ignored if they’re mixed. Replace numbered captures with non-capturing groupings or named captures.
# bad /(?<foo>FOO)(BAR)/
# good /(?<foo>FOO)(?<bar>BAR)/
# good /(?<foo>FOO)(?:BAR)/
# good /(FOO)(BAR)/
Lint/MultipleComparison
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.47 |
1.1 |
In math and Python, we can use x < y < z
style comparison to compare
multiple value. However, we can’t use the comparison in Ruby. However,
the comparison is not syntax error. This cop checks the bad usage of
comparison operators.
Lint/NestedMethodDefinition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.32 |
- |
This cop checks for nested method definitions.
Examples
# bad
# `bar` definition actually produces methods in the same scope
# as the outer `foo` method. Furthermore, the `bar` method
# will be redefined every time `foo` is invoked.
def foo
def bar
end
end
# good
def foo
bar = -> { puts 'hello' }
bar.call
end
# good
def foo
self.class.class_eval do
def bar
end
end
end
def foo
self.class.module_exec do
def bar
end
end
end
# good
def foo
class << self
def bar
end
end
end
Lint/NestedPercentLiteral
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.52 |
- |
This cop checks for nested percent literals.
Examples
# bad
# The percent literal for nested_attributes is parsed as four tokens,
# yielding the array [:name, :content, :"%i[incorrectly", :"nested]"].
attributes = {
valid_attributes: %i[name content],
nested_attributes: %i[name content %i[incorrectly nested]]
}
# good
# Neither is incompatible with the bad case, but probably the intended code.
attributes = {
valid_attributes: %i[name content],
nested_attributes: [:name, :content, %i[incorrectly nested]]
}
attributes = {
valid_attributes: %i[name content],
nested_attributes: [:name, :content, [:incorrectly, :nested]]
}
Lint/NextWithoutAccumulator
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.36 |
- |
Don’t omit the accumulator when calling next
in a reduce
block.
Lint/NoReturnInBeginEndBlocks
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.2 |
- |
Checks for the presence of a return
inside a begin..end
block
in assignment contexts.
In this situation, the return
will result in an exit from the current
method, possibly leading to unexpected behavior.
Examples
# bad
@some_variable ||= begin
return some_value if some_condition_is_met
do_something
end
# good
@some_variable ||= begin
if some_condition_is_met
some_value
else
do_something
end
end
# good
some_variable = if some_condition_is_met
return if another_condition_is_met
some_value
else
do_something
end
Lint/NonDeterministicRequireOrder
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.78 |
- |
Dir[…]
and Dir.glob(…)
do not make any guarantees about
the order in which files are returned. The final order is
determined by the operating system and file system.
This means that using them in cases where the order matters,
such as requiring files, can lead to intermittent failures
that are hard to debug. To ensure this doesn’t happen,
always sort the list.
Dir.glob
and Dir[]
sort globbed results by default in Ruby 3.0.
So all bad cases are acceptable when Ruby 3.0 or higher are used.
This cop will be deprecated and removed when supporting only Ruby 3.0 and higher.
Examples
# bad
Dir["./lib/**/*.rb"].each do |file|
require file
end
# good
Dir["./lib/**/*.rb"].sort.each do |file|
require file
end
# bad
Dir.glob(Rails.root.join(__dir__, 'test', '*.rb')) do |file|
require file
end
# good
Dir.glob(Rails.root.join(__dir__, 'test', '*.rb')).sort.each do |file|
require file
end
# bad
Dir['./lib/**/*.rb'].each(&method(:require))
# good
Dir['./lib/**/*.rb'].sort.each(&method(:require))
# bad
Dir.glob(Rails.root.join('test', '*.rb'), &method(:require))
# good
Dir.glob(Rails.root.join('test', '*.rb')).sort.each(&method(:require))
# good - Respect intent if `sort` keyword option is specified in Ruby 3.0 or higher.
Dir.glob(Rails.root.join(__dir__, 'test', '*.rb'), sort: false).each(&method(:require))
Lint/NonLocalExitFromIterator
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.30 |
- |
This cop checks for non-local exits from iterators without a return value. It registers an offense under these conditions:
-
No value is returned,
-
the block is preceded by a method chain,
-
the block has arguments,
-
the method which receives the block is not
define_method
ordefine_singleton_method
, -
the return is not contained in an inner scope, e.g. a lambda or a method definition.
Examples
class ItemApi
rescue_from ValidationError do |e| # non-iteration block with arg
return { message: 'validation error' } unless e.errors # allowed
error_array = e.errors.map do |error| # block with method chain
return if error.suppress? # warned
return "#{error.param}: invalid" unless error.message # allowed
"#{error.param}: #{error.message}"
end
{ message: 'validation error', errors: error_array }
end
def update_items
transaction do # block without arguments
return unless update_necessary? # allowed
find_each do |item| # block without method chain
return if item.stock == 0 # false-negative...
item.update!(foobar: true)
end
end
end
end
Lint/NumberConversion
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Disabled |
Yes |
Yes (Unsafe) |
0.53 |
1.1 |
This cop warns the usage of unsafe number conversions. Unsafe number conversion can cause unexpected error if auto type conversion fails. Cop prefer parsing with number class instead.
Conversion with Integer
, Float
, etc. will raise an ArgumentError
if given input that is not numeric (eg. an empty string), whereas
to_i
, etc. will try to convert regardless of input (''.to_i ⇒ 0
).
As such, this cop is disabled by default because it’s not necessarily
always correct to raise if a value is not numeric.
Some values cannot be converted properly using one of the Kernel
method (for instance, Time and DateTime values are allowed by this
cop by default). Similarly, Rails' duration methods do not work well
with Integer() and can be ignored with IgnoredMethods .
|
Lint/NumberedParameterAssignment
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.9 |
- |
This cop checks for uses of numbered parameter assignment. It emulates the following warning in Ruby 2.7:
% ruby -ve '_1 = :value' ruby 2.7.2p137 (2020-10-01 revision 5445e04352) [x86_64-darwin19] -e:1: warning: `_1' is reserved for numbered parameter; consider another name
Assiging to numbered parameter (from _1
to _9
) cause an error in Ruby 3.0.
% ruby -ve '_1 = :value' ruby 3.0.0p0 (2020-12-25 revision 95aff21468) [x86_64-darwin19] -e:1: _1 is reserved for numbered parameter
The parametered parameters are from _1 to _9 . This cop checks _0 , and over _10
as well to prevent confusion.
|
Lint/OrAssignmentToConstant
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
No |
Yes (Unsafe) |
1.9 |
- |
This cop checks for unintended or-assignment to a constant.
Constants should always be assigned in the same location. And its value
should always be the same. If constants are assigned in multiple
locations, the result may vary depending on the order of require
.
Also, if you already have such an implementation, auto-correction may change the result.
Lint/OrderedMagicComments
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.53 |
- |
Checks the proper ordering of magic comments and whether a magic comment is not placed before a shebang.
Examples
# bad
# frozen_string_literal: true
# encoding: ascii
p [''.frozen?, ''.encoding] #=> [true, #<Encoding:UTF-8>]
# good
# encoding: ascii
# frozen_string_literal: true
p [''.frozen?, ''.encoding] #=> [true, #<Encoding:US-ASCII>]
# good
#!/usr/bin/env ruby
# encoding: ascii
# frozen_string_literal: true
p [''.frozen?, ''.encoding] #=> [true, #<Encoding:US-ASCII>]
Lint/ParenthesesAsGroupedExpression
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.12 |
0.83 |
Checks for space between the name of a called method and a left parenthesis.
Examples
# bad
do_something (foo)
# good
do_something(foo)
do_something (2 + 3) * 4
do_something (foo * bar).baz
Lint/PercentStringArray
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.41 |
- |
This cop checks for quotes and commas in %w, e.g. %w('foo', "bar")
It is more likely that the additional characters are unintended (for example, mistranslating an array of literals to percent string notation) rather than meant to be part of the resulting strings.
Lint/PercentSymbolArray
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.41 |
- |
This cop checks for colons and commas in %i, e.g. %i(:foo, :bar)
It is more likely that the additional characters are unintended (for example, mistranslating an array of literals to percent string notation) rather than meant to be part of the resulting symbols.
Lint/RaiseException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.81 |
0.86 |
This cop checks for raise
or fail
statements which are
raising Exception
class.
You can specify a module name that will be an implicit namespace
using AllowedImplicitNamespaces
option. The cop cause a false positive
for namespaced Exception
when a namespace is omitted. This option can
prevent the false positive by specifying a namespace to be omitted for
Exception
. Alternatively, make Exception
a fully qualified class
name with an explicit namespace.
Examples
# bad
raise Exception, 'Error message here'
# good
raise StandardError, 'Error message here'
Lint/RedundantCopDisableDirective
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.76 |
- |
This cop detects instances of rubocop:disable comments that can be removed without causing any offenses to be reported. It’s implemented as a cop in that it inherits from the Cop base class and calls add_offense. The unusual part of its implementation is that it doesn’t have any on_* methods or an investigate method. This means that it doesn’t take part in the investigation phase when the other cops do their work. Instead, it waits until it’s called in a later stage of the execution. The reason it can’t be implemented as a normal cop is that it depends on the results of all other cops to do its work.
Lint/RedundantCopEnableDirective
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.76 |
- |
This cop detects instances of rubocop:enable comments that can be removed.
When comment enables all cops at once rubocop:enable all
that cop checks whether any cop was actually enabled.
Lint/RedundantDirGlobSort
Required Ruby version: 3.0 |
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
Yes |
1.8 |
- |
Sort globbed results by default in Ruby 3.0.
This cop checks for redundant sort
method to Dir.glob
and Dir[]
.
Lint/RedundantRequireStatement
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.76 |
- |
Checks for unnecessary require
statement.
The following features are unnecessary require
statement because
they are already loaded.
ruby -ve 'p $LOADED_FEATURES.reject { |feature| %r|/| =~ feature }' ruby 2.2.8p477 (2017-09-14 revision 59906) [x86_64-darwin13] ["enumerator.so", "rational.so", "complex.so", "thread.rb"]
This cop targets Ruby 2.2 or higher containing these 4 features.
Lint/RedundantSafeNavigation
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.93 |
- |
This cop checks for redundant safe navigation calls.
instance_of?
, kind_of?
, is_a?
, eql?
, respond_to?
, and equal?
methods
are checked by default. These are customizable with AllowedMethods
option.
This cop is marked as unsafe, because auto-correction can change the
return type of the expression. An offending expression that previously
could return nil
will be auto-corrected to never return nil
.
In the example below, the safe navigation operator (&.
) is unnecessary
because NilClass
has methods like respond_to?
and is_a?
.
Lint/RedundantSplatExpansion
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.76 |
1.7 |
This cop checks for unneeded usages of splat expansion
Examples
# bad
a = *[1, 2, 3]
a = *'a'
a = *1
['a', 'b', *%w(c d e), 'f', 'g']
# good
c = [1, 2, 3]
a = *c
a, b = *c
a, *b = *c
a = *1..10
a = ['a']
['a', 'b', 'c', 'd', 'e', 'f', 'g']
# bad
do_something(*['foo', 'bar', 'baz'])
# good
do_something('foo', 'bar', 'baz')
# bad
begin
foo
rescue *[StandardError, ApplicationError]
bar
end
# good
begin
foo
rescue StandardError, ApplicationError
bar
end
# bad
case foo
when *[1, 2, 3]
bar
else
baz
end
# good
case foo
when 1, 2, 3
bar
else
baz
end
Lint/RedundantStringCoercion
Lint/RegexpAsCondition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.51 |
0.86 |
This cop checks for regexp literals used as match-current-line
.
If a regexp literal is in condition, the regexp matches $_
implicitly.
Lint/RequireParentheses
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.18 |
- |
This cop checks for expressions where there is a call to a predicate method with at least one argument, where no parentheses are used around the parameter list, and a boolean operator, && or ||, is used in the last argument.
The idea behind warning for these constructs is that the user might be under the impression that the return value from the method call is an operand of &&/||.
Lint/RescueException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
0.27 |
This cop checks for rescue
blocks targeting the Exception class.
Examples
# bad
begin
do_something
rescue Exception
handle_exception
end
# good
begin
do_something
rescue ArgumentError
handle_exception
end
Lint/RescueType
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.49 |
- |
Check for arguments to rescue
that will result in a TypeError
if an exception is raised.
Lint/ReturnInVoidContext
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.50 |
- |
This cop checks for the use of a return with a value in a context where the value will be ignored. (initialize and setter methods)
Lint/SafeNavigationChain
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.47 |
0.77 |
The safe navigation operator returns nil if the receiver is nil. If you chain an ordinary method call after a safe navigation operator, it raises NoMethodError. We should use a safe navigation operator after a safe navigation operator. This cop checks for the problem outlined above.
Lint/SafeNavigationConsistency
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.55 |
0.77 |
This cop check to make sure that if safe navigation is used for a method
call in an &&
or ||
condition that safe navigation is used for all
method calls on that same object.
Lint/SafeNavigationWithEmpty
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.62 |
0.87 |
This cop checks to make sure safe navigation isn’t used with empty?
in
a conditional.
While the safe navigation operator is generally a good idea, when
checking foo&.empty?
in a conditional, foo
being nil
will actually
do the opposite of what the author intends.
Lint/ScriptPermission
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.49 |
0.50 |
This cop checks if a file which has a shebang line as its first line is granted execute permission.
Examples
# bad
# A file which has a shebang line as its first line is not
# granted execute permission.
#!/usr/bin/env ruby
puts 'hello, world'
# good
# A file which has a shebang line as its first line is
# granted execute permission.
#!/usr/bin/env ruby
puts 'hello, world'
# good
# A file which has not a shebang line as its first line is not
# granted execute permission.
puts 'hello, world'
Lint/SendWithMixinArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.75 |
- |
This cop checks for send
, public_send
, and send
methods
when using mix-in.
include
and prepend
methods were private methods until Ruby 2.0,
they were mixed-in via send
method. This cop uses Ruby 2.1 or
higher style that can be called by public methods.
And extend
method that was originally a public method is also targeted
for style unification.
Examples
# bad
Foo.send(:include, Bar)
Foo.send(:prepend, Bar)
Foo.send(:extend, Bar)
# bad
Foo.public_send(:include, Bar)
Foo.public_send(:prepend, Bar)
Foo.public_send(:extend, Bar)
# bad
Foo.__send__(:include, Bar)
Foo.__send__(:prepend, Bar)
Foo.__send__(:extend, Bar)
# good
Foo.include Bar
Foo.prepend Bar
Foo.extend Bar
Lint/ShadowedArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.52 |
- |
This cop checks for shadowed arguments.
This cop has IgnoreImplicitReferences
configuration option.
It means argument shadowing is used in order to pass parameters
to zero arity super
when IgnoreImplicitReferences
is true
.
Examples
# bad
do_something do |foo|
foo = 42
puts foo
end
def do_something(foo)
foo = 42
puts foo
end
# good
do_something do |foo|
foo = foo + 42
puts foo
end
def do_something(foo)
foo = foo + 42
puts foo
end
def do_something(foo)
puts foo
end
Lint/ShadowedException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.41 |
- |
This cop checks for a rescued exception that get shadowed by a less specific exception being rescued before a more specific exception is rescued.
Examples
# bad
begin
something
rescue Exception
handle_exception
rescue StandardError
handle_standard_error
end
# good
begin
something
rescue StandardError
handle_standard_error
rescue Exception
handle_exception
end
# good, however depending on runtime environment.
#
# This is a special case for system call errors.
# System dependent error code depends on runtime environment.
# For example, whether `Errno::EAGAIN` and `Errno::EWOULDBLOCK` are
# the same error code or different error code depends on environment.
# This good case is for `Errno::EAGAIN` and `Errno::EWOULDBLOCK` with
# the same error code.
begin
something
rescue Errno::EAGAIN, Errno::EWOULDBLOCK
handle_standard_error
end
Lint/ShadowingOuterLocalVariable
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
- |
This cop checks for the use of local variable names from an outer scope
in block arguments or block-local variables. This mirrors the warning
given by ruby -cw
prior to Ruby 2.6:
"shadowing outer local variable - foo".
Shadowing of variables in block passed to Ractor.new is allowed
because Ractor should not access outer variables.
eg. following syle is encouraged:
|
worker_id, pipe = env Ractor.new(worker_id, pipe) do |worker_id, pipe| end
Lint/StructNewOverride
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.81 |
- |
This cop checks unexpected overrides of the Struct
built-in methods
via Struct.new
.
Examples
# bad
Bad = Struct.new(:members, :clone, :count)
b = Bad.new([], true, 1)
b.members #=> [] (overriding `Struct#members`)
b.clone #=> true (overriding `Object#clone`)
b.count #=> 1 (overriding `Enumerable#count`)
# good
Good = Struct.new(:id, :name)
g = Good.new(1, "foo")
g.members #=> [:id, :name]
g.clone #=> #<struct Good id=1, name="foo">
g.count #=> 2
Lint/SuppressedException
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
1.12 |
This cop checks for rescue
blocks with no body.
Examples
# bad
def some_method
do_something
rescue
end
# bad
begin
do_something
rescue
end
# good
def some_method
do_something
rescue
handle_exception
end
# good
begin
do_something
rescue
handle_exception
end
AllowComments: true (default)
# good
def some_method
do_something
rescue
# do nothing
end
# good
begin
do_something
rescue
# do nothing
end
AllowComments: false
# bad
def some_method
do_something
rescue
# do nothing
end
# bad
begin
do_something
rescue
# do nothing
end
Configurable attributes
Name | Default value | Configurable values |
---|---|---|
AllowComments |
|
Boolean |
AllowNil |
|
Boolean |
Lint/SymbolConversion
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
Yes |
1.9 |
1.16 |
This cop checks for uses of literal strings converted to a symbol where a literal symbol could be used instead.
There are two possible styles for this cop.
strict
(default) will register an offense for any incorrect usage.
consistent
additionally requires hashes to use the same style for
every symbol key (ie. if any symbol key needs to be quoted it requires
all keys to be quoted).
Examples
# bad
'string'.to_sym
:symbol.to_sym
'underscored_string'.to_sym
:'underscored_symbol'
'hyphenated-string'.to_sym
# good
:string
:symbol
:underscored_string
:underscored_symbol
:'hyphenated-string'
Lint/Syntax
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
- |
This cop repacks Parser’s diagnostics/errors into RuboCop’s offenses.
Lint/ToEnumArguments
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.1 |
- |
This cop ensures that to_enum
/enum_for
, called for the current method,
has correct arguments.
Lint/ToJSON
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.66 |
- |
This cop checks to make sure #to_json
includes an optional argument.
When overriding #to_json
, callers may invoke JSON
generation via JSON.generate(your_obj)
. Since JSON#generate
allows
for an optional argument, your method should too.
Lint/TopLevelReturnWithArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
- |
This cop checks for top level return with arguments. If there is a top-level return statement with an argument, then the argument is always ignored. This is detected automatically since Ruby 2.7.
Lint/TrailingCommaInAttributeDeclaration
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.90 |
- |
This cop checks for trailing commas in attribute declarations, such as
#attr_reader
. Leaving a trailing comma will nullify the next method
definition by overriding it with a getter method.
Lint/TripleQuotes
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
Yes |
1.9 |
- |
This cop checks for "triple quotes" (strings delimted by any odd number of quotes greater than 1).
Ruby allows multiple strings to be implicitly concatenated by just
being adjacent in a statement (ie. "foo""bar" == "foobar"
). This sometimes
gives the impression that there is something special about triple quotes, but
in fact it is just extra unnecessary quotes and produces the same string. Each
pair of quotes produces an additional concatenated empty string, so the result
is still only the "actual" string within the delimiters.
Although this cop is called triple quotes, the same behavior is present for strings delimited by 5, 7, etc. quotation marks. |
Lint/UnderscorePrefixedVariableName
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.21 |
- |
This cop checks for underscore-prefixed variables that are actually used.
Since block keyword arguments cannot be arbitrarily named at call
sites, the AllowKeywordBlockArguments
will allow use of underscore-
prefixed block keyword arguments.
Examples
Lint/UnexpectedBlockArity
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
No |
No |
1.5 |
- |
This cop checks for a block that is known to need more positional
block arguments than are given (by default this is configured for
Enumerable
methods needing 2 arguments). Optional arguments are allowed,
although they don’t generally make sense as the default value will
be used. Blocks that have no receiver, or take splatted arguments
(ie. *args
) are always accepted.
Keyword arguments (including **kwargs
) do not get counted towards
this, as they are not used by the methods in question.
This cop matches for method names only and hence cannot tell apart methods with same name in different classes. |
Method names and their expected arity can be configured like this:
Methods: inject: 2 reduce: 2
Lint/UnmodifiedReduceAccumulator
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Pending |
Yes |
No |
1.1 |
1.5 |
Looks for reduce
or inject
blocks where the value returned (implicitly or
explicitly) does not include the accumulator. A block is considered valid as
long as at least one return value includes the accumulator.
If the accumulator is not included in the return value, then the entire block will just return a transformation of the last element value, and could be rewritten as such without a loop.
Also catches instances where an index of the accumulator is returned, as this may change the type of object being retained.
For the purpose of reducing false positives, this cop only flags
returns in reduce blocks where the element is the only variable in
the expression (since we will not be able to tell what other variables
relate to via static analysis).
|
Examples
# bad
(1..4).reduce(0) do |acc, el|
el * 2
end
# bad, may raise a NoMethodError after the first iteration
%w(a b c).reduce({}) do |acc, letter|
acc[letter] = true
end
# good
(1..4).reduce(0) do |acc, el|
acc + el * 2
end
# good, element is returned but modified using the accumulator
values.reduce do |acc, el|
el << acc
el
end
# good, returns the accumulator instead of the index
%w(a b c).reduce({}) do |acc, letter|
acc[letter] = true
acc
end
# good, at least one branch returns the accumulator
values.reduce(nil) do |result, value|
break result if something?
value
end
# good, recursive
keys.reduce(self) { |result, key| result[key] }
# ignored as the return value cannot be determined
enum.reduce do |acc, el|
x = foo(acc, el)
bar(x)
end
Lint/UnreachableCode
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
- |
This cop checks for unreachable code.
The check are based on the presence of flow of control
statement in non-final position in begin
(implicit) blocks.
Lint/UnreachableLoop
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.89 |
1.7 |
This cop checks for loops that will have at most one iteration.
A loop that can never reach the second iteration is a possible error in the code.
In rare cases where only one iteration (or at most one iteration) is intended behavior,
the code should be refactored to use if
conditionals.
Block methods that are used with `Enumerable`s are considered to be loops. |
IgnoredPatterns
can be used to match against the block receiver in order to allow
code that would otherwise be registered as an offense (eg. times
used not in an
Enumerable
context).
Examples
# bad
while node
do_something(node)
node = node.parent
break
end
# good
while node
do_something(node)
node = node.parent
end
# bad
def verify_list(head)
item = head
begin
if verify(item)
return true
else
return false
end
end while(item)
end
# good
def verify_list(head)
item = head
begin
if verify(item)
item = item.next
else
return false
end
end while(item)
true
end
# bad
def find_something(items)
items.each do |item|
if something?(item)
return item
else
raise NotFoundError
end
end
end
# good
def find_something(items)
items.each do |item|
if something?(item)
return item
end
end
raise NotFoundError
end
# bad
2.times { raise ArgumentError }
Lint/UnusedBlockArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.21 |
0.22 |
This cop checks for unused block arguments.
Examples
# bad
do_something do |used, unused|
puts used
end
do_something do |bar|
puts :foo
end
define_method(:foo) do |bar|
puts :baz
end
# good
do_something do |used, _unused|
puts used
end
do_something do
puts :foo
end
define_method(:foo) do |_bar|
puts :baz
end
Lint/UnusedMethodArgument
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.21 |
0.81 |
This cop checks for unused method arguments.
Examples
# bad
def some_method(used, unused, _unused_but_allowed)
puts used
end
# good
def some_method(used, _unused, _unused_but_allowed)
puts used
end
Lint/UriEscapeUnescape
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.50 |
- |
This cop identifies places where URI.escape
can be replaced by
CGI.escape
, URI.encode_www_form
, or URI.encode_www_form_component
depending on your specific use case.
Also this cop identifies places where URI.unescape
can be replaced by
CGI.unescape
, URI.decode_www_form
,
or URI.decode_www_form_component
depending on your specific use case.
Examples
# bad
URI.escape('http://example.com')
URI.encode('http://example.com')
# good
CGI.escape('http://example.com')
URI.encode_www_form([['example', 'param'], ['lang', 'en']])
URI.encode_www_form(page: 10, locale: 'en')
URI.encode_www_form_component('http://example.com')
# bad
URI.unescape(enc_uri)
URI.decode(enc_uri)
# good
CGI.unescape(enc_uri)
URI.decode_www_form(enc_uri)
URI.decode_www_form_component(enc_uri)
Lint/UriRegexp
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.50 |
- |
This cop identifies places where URI.regexp
is obsolete and should
not be used. Instead, use URI::DEFAULT_PARSER.make_regexp
.
Lint/UselessAccessModifier
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
Yes |
0.20 |
0.83 |
This cop checks for redundant access modifiers, including those with no
code, those which are repeated, and leading public
modifiers in a
class or module body. Conditionally-defined methods are considered as
always being defined, and thus access modifiers guarding such methods
are not redundant.
This cop has ContextCreatingMethods
option. The default setting value
is an empty array that means no method is specified.
This setting is an array of methods which, when called, are known to
create its own context in the module’s current access context.
It also has MethodCreatingMethods
option. The default setting value
is an empty array that means no method is specified.
This setting is an array of methods which, when called, are known to
create other methods in the module’s current access context.
Examples
# bad
class Foo
public # this is redundant (default access is public)
def method
end
end
# bad
class Foo
# The following is redundant (methods defined on the class'
# singleton class are not affected by the public modifier)
public
def self.method3
end
end
# bad
class Foo
protected
define_method(:method2) do
end
protected # this is redundant (repeated from previous modifier)
[1,2,3].each do |i|
define_method("foo#{i}") do
end
end
end
# bad
class Foo
private # this is redundant (no following methods are defined)
end
# good
class Foo
private # this is not redundant (a method is defined)
def method2
end
end
# good
class Foo
# The following is not redundant (conditionally defined methods are
# considered as always defining a method)
private
if condition?
def method
end
end
end
# good
class Foo
protected # this is not redundant (a method is defined)
define_method(:method2) do
end
end
ContextCreatingMethods: concerning
# Lint/UselessAccessModifier:
# ContextCreatingMethods:
# - concerning
# good
require 'active_support/concern'
class Foo
concerning :Bar do
def some_public_method
end
private
def some_private_method
end
end
# this is not redundant because `concerning` created its own context
private
def some_other_private_method
end
end
Lint/UselessAssignment
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.11 |
- |
This cop checks for every useless assignment to local variable in every
scope.
The basic idea for this cop was from the warning of ruby -cw
:
assigned but unused variable - foo
Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.
Lint/UselessElseWithoutRescue
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.17 |
- |
This cop checks for useless else
in begin..end
without rescue
.
This syntax is no longer valid on Ruby 2.6 or higher and this cop is going to be removed at some point the future. |
Lint/UselessMethodDefinition
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.90 |
- |
This cop checks for useless method definitions, specifically: empty constructors
and methods just delegating to super
.
This cop is marked as unsafe as it can trigger false positives for cases when an empty constructor just overrides the parent constructor, which is bad anyway.
Lint/UselessSetterCall
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.13 |
1.2 |
This cop checks for setter call to local variable as the final expression of a function definition. Its auto-correction is marked as unsafe because return value will be changed.
There are edge cases in which the local variable references a value that is also accessible outside the local scope. This is not detected by the cop, and it can yield a false positive. |
Lint/UselessTimes
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
No |
Yes (Unsafe) |
0.91 |
- |
This cop checks for uses of Integer#times
that will never yield
(when the integer ⇐ 0) or that will only ever yield once
(1.times
).
This cop is marked as unsafe as times
returns its receiver, which
is usually OK, but might change behavior.
Lint/Void
Enabled by default | Safe | Supports autocorrection | VersionAdded | VersionChanged |
---|---|---|---|---|
Enabled |
Yes |
No |
0.9 |
- |
This cop checks for operators, variables, literals, and nonmutating methods used in void context.