Development

This section of the documentation will teach you how to develop new cops. We’ll start with generating a cop template and then we’ll address the various aspects of its implementation (interacting with the AST, autocorrect, configuration) and testing.

Create a new cop

Clone the repository and run bundle install if not done yet. The following rake task can only be run inside the rubocop project directory itself.

Use the bundled rake task new_cop to generate a cop template:

$ bundle exec rake 'new_cop[Department/Name]'
[create] lib/rubocop/cop/department/name.rb
[create] spec/rubocop/cop/department/name_spec.rb
[modify] lib/rubocop.rb - `require_relative 'rubocop/cop/department/name'` was injected.
[modify] A configuration for the cop is added into config/default.yml.
Do 4 steps:
  1. Modify the description of Department/Name in config/default.yml
  2. Implement your new cop in the generated file!
  3. Commit your new cop with a message such as
     e.g. "Add new `Department/Name` cop"
  4. Run `bundle exec rake changelog:new` to generate a changelog entry
     for your new cop.

Basics

RuboCop uses the parser library to create the Abstract Syntax Tree (AST) representation of the code.

You can install parser gem and use ruby-parse command line utility to check what the AST looks like in the output.

$ gem install parser

And then try to parse a simple integer representation with ruby-parse:

$ ruby-parse -e '1'
(int 1)

Each expression surrounded by parentheses represents a node in the AST. The first element is the node type and the tail contains the children with all information needed to represent the code.

Here’s another example - a local variable name being assigned the string value "John":

$ ruby-parse -e 'name = "John"'
(lvasgn :name
  (str "John"))

Inspecting the AST representation

Let’s imagine we want to simplify statements from !array.empty? to array.any?:

First, check what the bad code returns in the Abstract Syntax Tree representation.

$ ruby-parse -e '!array.empty?'
(send
  (send
    (send nil :array) :empty?) :!)

Now, it’s time to debug our expression using the REPL from RuboCop:

$ bin/console

First we need to declare the code that we want to match, and use the ProcessedSource that is a simple wrap to make the parser interpret the code and build the AST:

code = '!something.empty?'
source = RuboCop::ProcessedSource.new(code, RUBY_VERSION.to_f)
node = source.ast
# => s(:send, s(:send, s(:send, nil, :something), :empty?), :!)

The node has a few attributes that can be useful in the journey:

node.type # => :send
node.children # => [s(:send, s(:send, nil, :something), :empty?), :!]
node.source # => "!something.empty?"

Implementation

Writing Node Pattern Rules

You can write cops without using NodePattern (and many older cops don’t use it), but it generally simplifies a lot the code, as manual node matching and destructuring can be quite verbose.

Now that you’re familiar with AST, you can learn a bit about the node pattern and use patterns to match with specific nodes that you want to match.

You can learn more about Node Pattern here.

Node pattern matches something very similar to the current output from AST representation, then let’s start with something very generic:

NodePattern.new('send').match(node) # => true

It matches because the root is a send type. Now lets match it deeply using parentheses to define details for sub-nodes. If you don’t care about what an internal node is, you can use ... to skip it and just consider " a node".

NodePattern.new('(send ...)').match(node) # => true
NodePattern.new('(send (send ...) :!)').match(node) # => true
NodePattern.new('(send (send (send ...) :empty?) :!)').match(node) # => true

Sometimes it’s hard to comprehend complex expressions you’re building with the pattern, then, if you got lost with the node pattern parens surrounding deeply, try to use the $ to capture the internal expression and check exactly each piece of the expression:

NodePattern.new('(send (send (send $...) :empty?) :!)').match(node) # => [nil, :something]

It’s not needed to strictly receive a send in the internal node because maybe it can also be a literal array like:

![].empty?

The code above has the following representation:

=> s(:send, s(:send, s(:array), :empty?), :!)

It’s possible to skip the internal node with ... to make sure that it’s just another internal node:

NodePattern.new('(send (send (...) :empty?) :!)').match(node) # => true

In other words, it says: "Match code calling !<expression>.empty?".

Great! Now, lets implement our cop to simplify such statements:

$ rake 'new_cop[Style/SimplifyNotEmptyWithAny]'

After the cop scaffold is generated, change the node matcher to match with the expression achieved previously:

def_node_matcher :not_empty_call?, <<~PATTERN
  (send (send $(...) :empty?) :!)
PATTERN

Note that we added a $ sign to capture the "expression" in !<expression>.empty?, it will become useful later.

Get yourself familiar with the AST node hooks that parser and rubocop-ast provide.

As it starts with a send type, it’s needed to implement the on_send method, as the cop scaffold already suggested:

def on_send(node)
  return unless not_empty_call?(node)

  add_offense(node)
end

The on_send callback is the most used and can be optimized by restricting the acceptable method names with a constant RESTRICT_ON_SEND.

And the final cop code will look like something like this:

module RuboCop
  module Cop
    module Style
      # `array.any?` is a simplified way to say `!array.empty?`
      #
      # @example
      #   # bad
      #   !array.empty?
      #
      #   # good
      #   array.any?
      #
      class SimplifyNotEmptyWithAny < Base
        MSG = 'Use `.any?` and remove the negation part.'.freeze
        RESTRICT_ON_SEND = [:!].freeze # optimization: don't call `on_send` unless
                                       # the method name is in this list

        def_node_matcher :not_empty_call?, <<~PATTERN
          (send (send $(...) :empty?) :!)
        PATTERN

        def on_send(node)
          return unless not_empty_call?(node)

          add_offense(node)
        end
      end
    end
  end
end

Note that on_send will be called on a given node before the callbacks on_<some type> for its children are called. There’s also a callback after_send that is called after the children are processed. There’s a similar after_<some type> callback for all types, except those that never have children.

Update the spec to cover the expected syntax:

describe RuboCop::Cop::Style::SimplifyNotEmptyWithAny, :config do
  it 'registers an offense when using `!a.empty?`' do
    expect_offense(<<~RUBY)
      !array.empty?
      ^^^^^^^^^^^^^ Use `.any?` and remove the negation part.
    RUBY
  end

  it 'does not register an offense when using `.any?` or `.empty?`' do
    expect_no_offenses(<<~RUBY)
      array.any?
      array.empty?
    RUBY
  end
end

If your code has variables of different lengths, you can use %{foo}, ^{foo}, and _{foo} to format your template; you can also abbreviate offense messages with […​]:

%w[raise fail].each do |keyword|
  expect_offense(<<~RUBY, keyword: keyword)
    %{keyword}(RuntimeError, msg)
    ^{keyword}^^^^^^^^^^^^^^^^^^^ Redundant `RuntimeError` argument [...]
  RUBY

%w[has_one has_many].each do |type|
  expect_offense(<<~RUBY, type: type)
    class Book
      %{type} :chapter, foreign_key: 'book_id'
      _{type}           ^^^^^^^^^^^^^^^^^^^^^^ Specifying the default [...]
    end
  RUBY
end

Autocorrect

The autocorrect can help humans automatically fix offenses that have been detected. It’s necessary to extend AutoCorrector. The method add_offense yields a corrector object that is a thin wrapper on parser’s TreeRewriter to which you can give instructions about what to do with the offensive node.

Let’s start with a simple spec to cover it:

it 'corrects `!a.empty?`' do
  expect_offense(<<~RUBY)
    !array.empty?
    ^^^^^^^^^^^^^ Use `.any?` and remove the negation part.
  RUBY

  expect_correction(<<~RUBY)
    array.any?
  RUBY
end

And then add the autocorrecting block on the cop side:

extend AutoCorrector

def on_send(node)
  expression = not_empty_call?(node)
  return unless expression

  add_offense(node) do |corrector|
    corrector.replace(node, "#{expression.source}.any?")
  end
end

The corrector allows you to insert_after, insert_before, wrap or replace a specific node or in any specific range of the code.

Range can be determined on node.location where it brings specific ranges for expression or other internal information that the node holds.

Preventing Clobbering

The corrector detects and prevents correcting overlapping nodes, to prevent one correction from clobbering another. Supporting nested corrections is done by taking multiple passes, and skipping corrections for nested nodes. This can be implemented using the IgnoredNode module:

 extend AutoCorrector
+include IgnoredNode

 def on_send(node)
   return unless some_condition?(node)

   add_offense(node) do |corrector|
+    next if part_of_ignored_node?(node)
+
     corrector.replace(node, "...")
   end
+
+  ignore_node(node)
 end

This works because the correcting a file is implemented by repeating investigation and correction until the file no longer requires correction, meaning all nested nodes will eventually be processed.

Note that expect_correction in Cop specs only asserts the result after one pass.

Limit by Ruby or Gem versions

Some cops apply changes that only apply in particular contexts, such as if the user has a minimum Ruby version. There are helpers that let you constrain your cops automatically, to only run where applicable.

Requiring a minimum Ruby version

If your cop uses new Ruby syntax or standard library APIs, it should only autocorrect if the user has the target Ruby version, which you set with TargetRubyVersion#minimum_target_ruby_version.

For example, the Performance/SelectMap cop requires Ruby 2.7, which introduced Enumerable#filter_map:

module RuboCop::Cop::Performance::SelectMap < Base
  extend TargetRubyVersion

  minimum_target_ruby_version 2.7

  # ...
end

This cop won’t autocorrect on Ruby 2.6 or older, and it won’t even report an offense (since there’s no better alternative to recommend instead).

Requiring a gem

If your cop depends on the presence of a gem, you can declare that with RuboCop::Cop::Base.requires_gem.

For example, to declare that MyCop should only apply if the bundle is using my-gem with a version between 1.2.3 and 4.5.6:

class MyCop < Base
  requires_gem "my-gem", ">= 1.2.3", "< 4.5.6"

  # ...
end

You can specify any gem requirement using the same syntax as your Gemfile.

Special case: Rails

Historically, many cops in rubocop-rails aren’t actually specific to Rails itself, but some of its components (e.g. ActiveSupport). These dependencies are declared with TargetRailsVersion.minimum_target_rails_version.

For example, the Rails/Pluck cop requires ActiveSupport 6.0, which introduces Enumerable#pluck:

module RuboCop::Cop::Rails::Pluck < Base
  extend TargetRailsVersion

  minimum_target_rails_version 6.0

  #...
end

Run tests

RuboCop supports two parser engines: the Parser gem and Prism. By default, tests are executed with the Parser:

$ bundle exec rake spec

To run all tests with the experimental support for Prism, use bundle exec prism_spec, and to execute tests for individual files, specify the environment variable PARSER_ENGINE=parser_prism.

e.g., PARSER_ENGINE=parser_prism spec/rubocop/cop/style/hash_syntax_spec.rb

bundle exec rake runs tests for both Parser gem and Prism parsers.

But ascii_spec rake task does not run by default. Because ascii_spec task has not been failing for a while. However, ascii_spec task will continue to be checked in CI.

In CI, all tests required for merging are executed. Please investigate if anything fails.

Configuration

Each cop can hold a configuration and you can refer to cop_config in the instance and it will bring a hash with options declared in the .rubocop.yml file.

For example, lets imagine we want to make configurable to make the replacement works with other method than .any?:

Style/SimplifyNotEmptyWithAny:
  Enabled: true
  ReplaceAnyWith: "size > 0"

And then on the autocorrect method, you just need to use the cop_config it:

def on_send(node)
  expression = not_empty_call?(node)
  return unless expression

  add_offense(node) do |corrector|
    replacement = cop_config['ReplaceAnyWith'] || 'any?'
    corrector.replace(node, "#{expression.source}.#{replacement}")
  end
end

Documentation

Every new cop requires explanation and examples to make it easy for the community to understand its purpose. This documentation is generated by yard and is added directly into the cop.rb file. For every SupportedStyle and unique configuration you have included in the cop, there needs to be examples. Examples must have valid Ruby syntax. Do not use upticks.

module Department
  # Description of your cop. Include description of ALL config options. Particularly
  # ones that take booleans and arrays, because we generally do not show examples for
  # configs with these value types.
  #
  # @example EnforcedStyle: bar
  #   # Description about this particular option
  #
  #   # bad
  #   bad_example1
  #   bad_example2
  #
  #   # good
  #   good_example1
  #   good_example2
  #
  # @example EnforcedStyle: foo (default)
  #   # Description about this particular option
  #
  #   # bad
  #   bad_example1
  #   bad_example2
  #
  #   # good
  #   good_example1
  #   good_example2
  #
  # @example AnyUniqueConfigKeyThatIsAString: qux (default)
  #   # Description about this particular option
  #
  #   # bad
  #   bad_example1
  #   bad_example2
  #
  #   # good
  #   good_example1
  #   good_example2
  #
  # @example AnyUniqueConfigKeyThatIsAString: thud
  #   # Description about this particular option
  #
  #   # bad
  #   bad_example1
  #   bad_example2
  #
  #   # good
  #   good_example1
  #   good_example2
  #
  class YourCop
    # ...

Take note of the placement and spacing of all the documentation pieces. Such as config keys being in alphabetical order, the (default) being specified, and one empty line before class YourCop. While not all examples in the codebase follow this exact format, we strive to make this consistent. PRs improving RuboCop documentation are very welcome.

Testing your cop in a real codebase

It’s generally good practice to check if your cop is working properly over a significant codebase (e.g. Rails or some big project you’re working on) to guarantee it’s working in a range of different syntaxes.

There are several ways to do this. Two common approaches:

  1. From within your local rubocop repo, run exe/rubocop ~/your/other/codebase.

  2. From within the other codebase’s Gemfile, set a path to your local repo like this: gem 'rubocop', path: '/full/path/to/rubocop'. Then run rubocop within your codebase.

With approach #2, you can use local versions of RuboCop extension repos such as rubocop-rspec as well.

To make it fast and do not get confused with other cops in action, you can use --only parameter in the command line to filter by your cop name:

$ rubocop --only Style/SimplifyNotEmptyWithAny